What are the characteristics of the vertical machining center? Here is an introduction to you

Vertical machining center is a kind of product in machine tool equipment, but its self-contained effect will be greater, and the range of touch will be greater, so we must pay attention when we understand these aspects. Here is a simple one for us Do an introduction to the characteristics of related vertical machining centers, and those who are interested can take a look.

What are the characteristics of the vertical machining center? Here is an introduction to you

　　1. The vertical machining center can complete the processes of milling, boring, drilling, tapping and cutting threads.

　2. Vertical machining center refers to a machining center with the spindle axis and the worktable perpendicular to it. It is mainly suitable for processing complex parts such as plates, discs, molds and small shells.

　　3. There are few vertical machining centers with three-axis and two-linkage, and three-axis and three-linkage can usually be completed. Some can carry out five-axis or six-axis control.

　　4. The cooling conditions of the vertical machining center are easy to establish, and the cutting fluid can directly reach the tool and the machining surface; the three coordinate axes conform to the Cartesian coordinate system

, It feels intuitive and the visual angle of the pattern is the same, the chips are easy to remove and fall, and avoid scratching the processed surface. Compared with the corresponding horizontal processing center, the structure is simple, the floor space is smaller, and the cost is lower.

　　 5. The column height of the vertical machining center is limited, and the processing range of box-like workpieces should be reduced. This is a defect of the vertical machining center. But the vertical machining center

Convenient clamping and positioning; easy to observe the movement track of the cutting tool, convenient to check and measure the debugging program, can find the problem in time, and carry out the shutdown processing or modification.

　　 I believe that we have introduced relevant knowledge points to us in this way. In the future, we should also understand it! If you have more needs to understand our equipment, you can call for consultation.