What are the commonly used knives in gantry machining center? Here is a brief introduction for you

Whether it is a gantry machining center or other machining centers, this type of equipment will use tools, and it is also a very commonly used equipment. Here is a brief introduction to some relevant knowledge points for you, if you are more interested If you can take a look.

What are the commonly used knives in gantry machining center? Here is a brief introduction for you

　　 Drilling and tapping machining center, gantry machining center and other Taiwan machining centers commonly used tools, tools can be divided into five categories according to the form of workpiece processing appearance:

　　● Hole processing tools, including drills, reaming drills, boring cutters, reamers and internal and external surface broaches, etc.;

　　● Thread processing tools, including taps, dies, active opening and closing thread cutting heads, thread turning tools and thread milling cutters, etc.;

　　● Process various exterior tools, including turning tools, planers, milling cutters, exterior broaches and files, etc.;

　　● Blocking tools, including toothed circular saw blades, band saws, bow saws, blocking turning tools and TPSG extrusion taps TIN

　　● Gear processing tools, including hobs, gear shaping cutters, gear shaving cutters, bevel gear processing tools, etc.;

　　 In addition, there are combined tools.

　　According to the cutting motion mode and the corresponding blade shape, cutting tools can be divided into three categories:

　　● Generative tools are used to process gear tooth surfaces or similar workpieces by the generative method, such as hobs, gear shapers, gear shaving cutters, bevel gear planers, and rolling knurling cutters.

　　● Forming tools, the cutting edge of this type of tool has the same or nearly the same shape as the cross-section of the workpiece to be processed, such as forming turning tools, forming planers, forming milling cutters, broaches, conical reamers and various thread processing tools, etc.;

　　● General tools, such as turning tools, planers, milling cutters (not including shaped turning tools, shaped planers and shaped milling cutters), boring tools, drills, reamers, reamers, cutting tools, saws, etc.