1、Matters needing attention in the operation of vertical machining center

Vertical machining center is a kind of CNC machining equipment with very comprehensive processing functions, and it is a high-precision necessary machine used in the processing of modern workpieces. The existing technical level once became an important symbol of the modernization of the enterprise, replacing processing machine tools, and becoming the current development direction of the manufacturing industry. At the same time, it is also an important model composition in the machine tool series, with a wide range of applications. The production position of the vertical machining center in the aviation production industry is particularly important.

The vertical machining center refers to the machining center with the spindle axis and the working table set straight. The vertical machining center is mainly suitable for processing plates, discs, molds and small shells. The vertical machining center can complete milling and boring. , Drilling, tapping and cutting threads. The operating environment of the vertical machining center, in order to improve the service life of the vertical machining center equipment, it is generally required to avoid direct sunlight and other heat radiation, and to avoid places with too humid, excessive dust or corrosive gas.

To formulate effective operating procedures, a series of practical and effective operating procedures should be drawn up in the use and handling of vertical machining centers. For example: smoothness, maintenance, reasonable use and standardized shift system, etc., are the primary content of the vertical machining center's use and management. Drawing up and abiding by operating regulations is one of the important measures to ensure the safe operation of vertical machining centers. Practice has proved that many problems can be reduced due to abide by the operating procedures. It should also be noted that the outstanding power supply guarantees. In order to avoid the influence of large power fluctuations (greater than ±10%) and possible instantaneous disturbance signals, the power supply of vertical machining center equipment is generally used for dedicated power supply (such as from low voltage The power distribution room is divided into one channel for the use of CNC machine tools alone) or the addition of a voltage stabilizing device, etc., can reduce the impact of power supply quality and electrical disturbance.

Vertical machining center machine tools are not easy to be sealed for a long time. After purchasing the vertical machining center machine tools, they must be fully utilized, especially in the first year of operation, so that the weak links that are prone to faults can be exposed as soon as possible, so that the faults can be eliminated during the warranty period. During processing, the opening and closing of the spindle of the vertical machining center should be minimized to reduce the wear of clutches, gears and other components. When there is no processing task, the CNC machine tool should also be powered on regularly. It is best to power on 1-2 times a week and run for about 1 hour each time to use the heat of the machine tool to reduce the humidity in the machine and prevent the electronic components from getting wet. At the same time, it can also detect the lack of battery power alarm in time to avoid the loss of system setting parameters.