Horizontal machining center AHM-800

Technical characteristics

The four-track base combines efficiency and stability

High-grade cast iron does not deform

All structural castings of this machine are completely made of high-grade cast iron (FC30), after tempering and internal stress relief treatment.

Large X, Y, Z axis travel

  The X, Y, Z axis stroke is 2000x1500x1400mm, which is the longest in the same class, which greatly increases the processing range.

Slide type

X, Z axis rails.

The Z-axis is equipped with 4 branch rails, with a total span of up to 2060mm.

Ya-axis hard rail.

Rib support under the wire rail

All linear rails are supported by ribs directly below to ensure that they will not be deformed under heavy loads.